Featured Post

Maintaining Your New California Garden: Life-friendly Fall Pruning

  Mother Nature's Backyard in November: illustrating life-friendly fall pruning. Late fall and early winter are important prun...

Showing posts with label garden crafts. Show all posts
Showing posts with label garden crafts. Show all posts

Monday, October 27, 2014

Garden Crafts: Making a Yarn-wrapped Vase or Bottle

 
Yarn-covered bottle using hand-dyed yarn (natural dye: Rabbitbush flowers)

Non-knitters often ask what they can make with the yarn they’ve dyed (http://mother-natures-backyard.blogspot.com/2012/10/solar-dyeing-with-native-plant-trimmings.html).  In fact, there are a number of crafts that use colored yarns.  Making a yarn-covered vase, bottle or container is one such craft.  We like it because it’s thrifty and sustainable; you recycle containers and left-over yarn into unique vases, boxes and jars.

This is a fairly easy craft; you may have actually done it in school.  It’s a great way to use up scraps of yarn, and is a wonderful rainy day activity.  It does take a little practice, but you’ll pick up the technique quickly.   Once you have some practice, you can introduce the craft to children (we suggest 4th grade and up – and using rather thick yarn for a beginning attempt).
 

Materials

All that’s needed are:

  • A bottle, jar or container to cover.  Start with smaller, straight-sided ones until you get the hang of it.  Glass and cardboard are a little easier to work with than plastic (at least in our hands). Plastic, wood or cardboard ones recommended for children. 
  • White glue (Elmer’s or liquid school glue).  Use the kind that dries clear.
  • Yarn of several colors – you’ll need 10-15 yards (meters) total, depending on the size of the bottle/jar/container.  Any yarn but the fancies and very thin yarns (which are too hard to work with) will do.    Wool, acrylic, hand- or commercially dyed – or a combination – can be used.  If doing this craft with children, use the thickest yarn you have.   Acrylic yarn may be easier to work with at first - it usually stretches less than wool.

We suggest choosing several colors of yarn that you like – 3-5 colors look nice for a typical bottle or jar (see above)

  • Piece of bulky yarn or string (enough to go around the container once plus a little extra).   It’s best if the color is neutral (white, brown, gray or black) or complements the other yarns.

  • Scissors to cut the yarn.
  • Paper or a large trash bag (to protect the work surface in case of drips).
  • Small piece of plastic wrap (or a plastic bag)
  • Fixative (optional) – see step 8, below
 

Instructions

  1. If using jars or bottles, remove paper labels (soak in warm soapy water overnight) and thoroughly wash the insides and outsides.  Be sure that the jar/bottle/container is completely dry before starting the project.
  2. Spread out paper/trash bag on the work surface. 
  3. Choose a selection of yarns that look nice together.  We suggest using yarns that are all the same thickness for your first project.  We also suggest choosing three or five colors, if possible.  Be sure that the yarns are straight, with no kinks or knots.
 

Foundation layer of household string


  1. Make the foundation layer

  • Spread a line of glue at the very bottom edge of the container.  Let it dry for about 1 minute.
  •  Take the bulky yarn or string and place it over the glue (to glue it in place).  Cut off any excess length and be sure that both ends are well attached (use a little extra glue if needed). 
  • Place the container right side up on the work surface.  Using the piece of plastic wrap, gently work the bulky yarn/string into place at the very bottom of the container (where the container meets the work surface).  Press the yarn/string in place, flattening it slightly against the container.  It’s important that the yarn/string is well-glued and even with the bottom of the container;  this will form the base for subsequent layers of yarn.
  • Let the foundation layer dry completely before adding color layers.
 
  1. Add the color layers

  • Choose the first color and lay out a straight piece that’s long enough to go around the container 3-5 times. 
  • Squeeze out a wavy ribbon of glue (a bit wider than you want your first color layer – ¾ inch is fine) just above the foundation layer. 
 
Spreading glue - yarn-covered vase project
 
  • Smooth the glue with your finger to make a thin, even coating.  Let the glue sit for about 45-60 seconds or until slightly tacky (time to wash your hands).
 
Wrapping yarn - yarn-covered vase project
 

  • Lay the yarn in place, starting just above the foundation layer and continuing around the container.  If working with wool (or other stretchy yarn) be sure you don’t stretch the yarn.  Continue to lay the yarn on the glued surface, around and around, until you run out of yarn.  Be sure both ends are firmly glued (use a little extra glue if needed).
 
Smoothing yarn with piece of plastic wrap
 
  • Using the piece of plastic wrap, gently push the yarn layers together (down) so there are no gaps where the container shows through.  Then flatten the yarn against the container surface so it adheres to the container.   You will have several minutes before the glue hardens, so take your time.  You can add a little more glue if needed. 
  • We suggest letting each layer dry for at least 30 minutes before you add the next layer.   It’s much easier to add a new layer when the one below it is dry.

  1. Continue adding color layers, following the steps above, until the container is covered.
 

Completed yarn-covered vase and bottle - yarn craft idea 
 

  1. Let the piece dry thoroughly.

8.   Spray with a fixative (optional) to make the vase/bottle/container waterproof.  If using a fixative, we suggest one of the non-toxic varieties. 
 

Yarn-covered vase with dried flowers: yarn is hand-dyed with natural dyes from
California native plants
 

We hope you enjoy this craft and that your unique new vase, bottle or box gives you years of enjoyment.    We like to use our vases with dried flowers.  The vase above has dried seed heads from Giant buckwheat (http://mother-natures-backyard.blogspot.com/2013/08/plant-of-month-august-st-catherines.html) and flowers from Felt-leaf everlasting (http://mother-natures-backyard.blogspot.com/2013/09/plant-of-month-september-wrights.html).

 

_____________________________________

 

We welcome your comments, below.  If you have questions, please e- mail us at: mothernaturesbackyard10@gmail.com

 

Monday, December 30, 2013

Garden Crafts: Making a Grapevine Wreath


Simple wreath made from grapevines


There’s nothing like the satisfaction that comes from using garden products to make items that are useful and attractive.  In previous posts we’ve talked about pressing flowers, using plant trimmings for natural dyes and making garden potpourri (search ‘garden crafts’ on this blog).   Another easy craft is making a grapevine wreath.  Some of you may already have trimmed back your grapevines.  If not, you still have time to make a grapevine wreath this winter (at least in our mild S. California climate).

Making a grapevine wreath is easy once you get used to handing the vines.  You’ll need 20 to 30 or more lengths of grapevine.  Cut them as long as you can – about 4-8 ft. is easiest to work with.  Be sure to choose vines that are still flexible (green vines are fine).  Vines no thicker than your little finger at the broadest are best.   You can see the vines we trimmed from our native wild grape (Vitis girdiana) below.   You’ll need to use the vines on the day you cut them, before they dry out.
 
 

Choose 5 or 6 of the thickest vines to form the foundation of the wreath.  Lay the vines out straight, removing any leaves or side branches.    Gently bend the bundle of vines into a circle of the desired size.  We suggest about 12 inches across for a small wreath and 18 or 20 inches for a larger wreath.   Tie the circle with stout string to hold the shape (see picture below).   



Continue to bend the bundle into a circle, tying as needed to hold the vines in place.  You’ll remove the string once the vine dries, so don’t worry about how it looks.  Now you have the foundation for your wreath.  The foundation may not be perfectly round, but don’t worry about shape too much; the shape will improve as you add more vines.  And you can even tweak the final shape just prior to drying.
 
 
Take another vine and tuck the thicker end firmly into the foundation.  Then wrap the new vine around the foundation, making about 6-8 wraps around the circle (see photo above).   Wrap until you reach the end of the vine, then tuck the end in.   Continue wrapping with the additional vines, starting each new vine at a different place around the foundation.  Try to alternate the direction of the wraps – starting clockwise with one vine, then counter-clockwise with the next – to give an even shape.
 
 
 

When you’ve used all your vines – or when the wreath is pleasingly full – you are almost done.  Don’t worry about the odd ends that stick out.  Some will disappear in the drying process, and the rest can be clipped off when dry.   If your wreath is not completely round, you can tie it into round with a string (see above).  Hang your wreath to dry in a cool, dry place.  It will probably take about 2 weeks to dry. 
 




Once dry, you can clip loose ends if needed.  Remove the string – the wreath should hold its shape if fully dry.   You can spray your wreath with a thin coat of clear spray varnish or use it as is.  We’ll suggest some ways to use your wreath during the next year (2014).


_____________________________________


We welcome your comments, below.  If you have questions, please e- mail us at: mothernaturesbackyard10@gmail.com

 

 


Friday, November 15, 2013

Garden Crafts: Making Potpourri from Scented Garden Trimmings




Southern California is blessed with a climate that’s perfect for plants with scented foliage.  Our native sages (Salvias), mints, roses, California Sagebrush and other Artemisias make our gardens a treat for the nose as well as the eye.  Add scented plants from other mediterranean climates – rosemary, thyme, lavender and others – and you’ve got a nice smelling garden.   Consider a plant’s aroma when choosing new plants for your garden.  You’ll be glad you did!

Fall is the best time to prune many scented plants; and pruning can produce lots of trimmings, even in a small garden.  Consider using your scented trimmings for garden crafts that produce products unique to your garden.  One of the easiest – and fun - is making potpourri.  It’s a good activity to do with children (in small groups).  You might even want to host a ‘potpourri party’, where guests bring scented materials from their gardens to share.   Making potpourri brings out the creative side in all of us.

A potpourri is simply a mixture of scented plant materials.  Most people think of natural room fresheners when they hear the word potpourri.  But people in times past – and thrifty gardeners now – use potpourri for much more.  Fill a small cloth bag with potpourri to make a sachet to scent a closet or clothes drawer.  Use a pretty fabric, tie the sachet with a ribbon and you’ve got a unique, inexpensive gift.   A cloth bag filled with potpourri can also be used to scent a bath or shower (just hang the bag under the running water).  You can use a cloth re-useable tea bag to hold the potpourri.  Potpourri can even be used under your pillowcase to scent your pillow.  Use a soothing sage, lavender or mint for a restful sleep

Making potpourri is easy.  But like anything involving scent, it allows lots of room for creative expression.  No two people smell a scent exactly the same.  We all have memories associated with particular scents.  And some scents just make us feel relaxed or energized.  So have fun combining scents to get just the right combination.

Here’s how to make your own unique blend of garden potpourri:

  1. Choose your plant materials.  A number of plant materials that can be used as a base for potpourri.  Choose any scented plant you like as long as it is not toxic.  Here are a few possibilities:
    • Native plants (leaves/stems): Sages (Salvias) all have slightly different scents (we particularly like Black, Purple, Cleveland and ‘Winifred Gilman’ Sages) ; California Sagebrush (Artemisia californica) and Mugwort (Artemisia douglasii); plants in the Mint family (Wild Mint – Mentha arvensis; Hummingbird Sage - Salvia spathacea; Fragrant Pitchersage -Lepechinia fragrans)
    • Other scented shrubs/herbs: Leaves/stems of Rosemary, Thyme, Lemon Verbena, Lavender, scented Geraniums, Mints, etc.; flowers like scented Rose petals, Carnations, Orange blossoms, etc.
    • Citrus fruits or apples: use thinly sliced citrus peel, or cut entire fruit in very thin slices before drying
  2. Dry the plant materials.  It’s very important that plant materials are completely dry, otherwise the potpourri may mildew.  Lay larger materials out to dry outdoors.  Turn them every few days until they are dry.  Or bundle the stems, tie and hang up to dry on a patio or porch.   Flowers, apple and citrus slices can be sun dried, dried on cookie sheets in a warm (less than 130°F) oven or dried in a food dehydrator.  Check flowers often – they can dry quickly.
  3. Prepare the plant materials.   Wearing leather gloves, strip leaves off woody stems of Salvias and shrubby Mediterranean herbs. Place each type of material in a separate plastic bag, seal & label with plant name and date.  For California Sagebrush, it’s easiest to just cut the ends of stems into pieces. Other materials need no additional preparation after drying.  The leaves simply drop off some dried materials.  Dried flowers and fruits are ready to be bagged as is.   It’s important to bag your materials as soon as they are dry to retain their fragrance.
  4. Choose a primary scent: Now the real fun begins.  Making a good potpourri is a bit like making a perfume.  You begin by choosing your primary scent.  This should be an aroma that you really enjoy.  It can be a strong/spicy scent (native California and Mediterranean herbs) or something more mild, but with a fairly strong scent: rose petals, mint, and other garden herbs.  This is going to be the primary scent for your potpourri, so take a good handful or two and place it in a plastic bag.   We suggest that you write down the names of your ingredients on a piece of paper.  You may even want to weigh/measure your ingredients so you can duplicate your ‘signature potpourri’ in the future.
  5. Choose 1 to 2 secondary scents:   The secondary scents should complement your primary scent.   If your primary scent is mild, choose mild secondaries so you don’t overpower the primary scent.  Some good secondaries include any of the primaries (in smaller amounts), the dried fruits, dried flowers, mints and perennial garden herbs.  If you have scented oils or single-scent perfumes (lavender; rose; gardenia; etc.) you can also use these as secondary scents.  Just place a little bit on a cotton ball or cotton pad – a little goes a long way – and place it in your bag of potpourri. Remember to write the materials on your ‘ingredients list’.
  6. Close the potpourri bag, shake it well, and let it sit for a half hour or more.  This will let the flavors mingle. 
  7. Open the bag and smell your potpourri.   You may decide that your potpourri is just right.  If so, it’s ready to use – and you can create another blend.  If you decide that your potpourri still needs a little something, smell the secondary scents again; one or more of them may be just what you need.  You can also use a little bit of dried spices from your kitchen cupboard.   You can add up to 4 additional (tertiary) scents.
  8. Once you’re happy with your blend, it’s ready to use.   

Don’t be afraid to experiment – sometimes unusual combinations are the most successful.  If you end up with a truly awful combination, just throw it in the compost bin and try again.  

_____________________________________
 

We welcome your comments, below.  If you have questions, please e- mail us at: mothernaturesbackyard10@gmail.com
 
 
 

Thursday, October 17, 2013

Garden Crafts: The Colors of California - Dyes from Native Plants


Wool yarn colored with dyes from California native plants.


October and November are important pruning months for California native plants.  While some large shrubs are best pruned in summer, many local natives are cut back during their brief fall dormancy (see   ‘Pruning Common Native Plants’ – November 2012, for more on pruning).   Fall pruning can produce lots of trimmings, even in a small garden.   These trimmings can be composted or chipped to provide mulch.  But they can also be used for some great garden crafts.

One of our favorite fall crafts is natural dyeing using native plant trimmings.  Solar dyeing (see ‘Solar Dyeing with Native Plant Trimmings’ – October 2012) is an easy way to dye yarns and cloth made from natural materials (particularly wool & cotton).  It’s a great way to get started with natural dyeing.   You can access our brief instruction guide at:   http://www.slideshare.net/cvadheim/solar-dyeing-using-native-plant-trimmings-27255522  
 
           

Colors obtained from California native plants can be extraordinary.   The foliage and flowers of many plants produce lovely shades of tans, yellows and oranges.   Depending on the amount of plant material used, you can obtain lovely pastel to medium shades with solar dyeing.  Others native dye plants produce beautiful red-browns and browns.   Very few native plants (anywhere in the world) produce blue colored dyes in appreciable amounts.   And other colors, like some pinks and purples, fade in time, particularly when exposed to light.

Leaves, small branches and some flowers are the easiest materials to use for solar dyeing.  We’ve prepared a table of some easy-to-use dye plants native to California.   The table gives hints on how to extract the most dye from each source.   You can access the table at:   http://www.slideshare.net/cvadheim/easy-natural-dye-sources-from-ca-table.  
 
Yarns dyed with Canaigre Dock (upper left), Rabbitbush
 (clockwise), Coyote Bush, Toyon and Utah Juniper
 
The plants in the table are commonly used in California gardens.   If you don’t grow them yourself, we suggest you contact local native plant gardens and nature preserves.  Many of them do extensive fall pruning and produce lots of trimmings.  Contact the garden or preserve to ask if you can have some.  Or contact other home gardeners who may have trimmings to spare.   Never collect dye plants in the wild; in most places, these plants need to be protected, not collected.
 
We hope you’ll want to try natural dyeing.  It’s fun, creative and a great way to use your fall trimmings.  You can also try using non-native and kitchen garden plants for solar dyeing.  Just be sure they aren’t toxic (check at FDA Poisonous Plants Database:



2013 'Mystery Jar' - Dye is Arroyo Willow (Salix lasiolepis)
 leaves & branches

If you live in Southern California, you may want to visit our October/November natural dye workshops and demonstrations at Mother Nature’s Backyard (see calendar page for details).  Each November, several local artists/crafts-persons  display their work and answer questions about natural dyes.  It’s a great way to learn more about dye craft, meet local fiber artists and get inspired to try something new.  We also unveil the results of our solar dye ‘mystery jar’ (see photo above for the 2013 ‘mystery jar’).

_____________________________________

 

We welcome your comments, below.  If you have questions, please e- mail us at: mothernaturesbackyard10@gmail.com

 
 

Wednesday, September 25, 2013

Garden Crafts: Making a Simple Bookmark with Pressed Flowers




Pressing garden flowers is a wonderful way to preserve the beauty of summer and spring.  We discussed how to press flowers in our April 2013   posting on ‘Pressing Wildflowers’, which can be accessed at  http://mother-natures-backyard.blogspot.com/2013_04_01_archive.html    Spring and summer can be busy times in the garden.  With the coming of fall, you may finally have time to put your pressed flowers to use.   A simple craft idea uses pressed flowers to make colorful bookmarks.  These unique and useful gifts are easy to do if you have access to a laminating machine.



The flowers used for making laminated bookmarks need to be thin and pressed very flat.  Look through your collection of pressed flowers for ones that are attractive and the right size – about 2  by 5 inches is a good size.   For background, choose a paper that complements your pressed flowers. A wide range of papers are available wherever scrapbooking supplies are sold.  We used pressed Birds-eye Gilia flowers (a native wildflower) for our bookmarks.  We selected a light cream and dark purple papers for the background, because they bring out the colors of the flowers (see above).   After trying the flowers on both backgrounds, we decided to use the cream as background with purple as border.

You can make your bookmark using only pressed flowers, but we like to include a little information on our bookmarks.  This is easy to do.  If you’re talented, print the information by hand; if not, use your computer to print the information on a light-colored background.  You can make 3 bookmarks from an 8 ½ x 11 sheet of paper – printed horizontally (set the page layout to 3 columns).   For our bookmarks, we included the common and scientific name of the flower and where it was grown (see below).



Cut out the bookmarks to the correct size.  We cut our inner background to 2 3/4 by 6 ½   inches  and the outer background (purple) to 3 ¼ by 7 ½  inches.  If you scrapbook, you likely have punches or edge-trimmers to make your borders even more decorative than ours.  



Carefully assemble the bookmarks in a laminating pouch, being sure that all edges are straight.   Run the pouch through the laminator, following the manufacturer’s operating  instructions.   Cut the bookmarks apart, leaving a ¼ inch laminated strip on all sides of each bookmark.    If desired, punch a hole in the top of the bookmark and insert a ribbon or cord.   That’s all there is to it!
_____________________________________
We welcome your comments, below.  You can also e-mail us at: mothernaturesbackyard10@gmail.com


Tuesday, April 16, 2013

Garden Crafts: Pressing Flowers


 
 
Southern California’s wildflower prairies are becoming rare due to  urbanization and other factors.  Fortunately, native annual wildflowers are easy to grow and seeds are readily available.    Growing wildflowers in your garden provides enjoyment now – and a source of garden craft and food materials for later. See our blog posting on ‘Growing Annual Wildflowers’ (January 2013) for tips on growing these lovely plants.

One of the easiest spring garden crafts is pressing flowers.   At this time of year, annual wildflowers are at their peak in local gardens.  What better time to preserve a little spring beauty to enjoy throughout the year!  Next month (May 2013) we’ll discuss ways to use pressed flowers; this month we focus on the actual mechanics of pressing flowers.

Many universities and natural history museums have herbariums or collections of dried plant specimens, usually documenting plants that are native to a particular region.  Herbarium specimens are created by drying and flattening plants parts – even entire plants – in a plant press.  Once dried, specimens are stored under cool, dry, bug-free conditions.  They survive in surprisingly good shape for many years; and are an invaluable resource for scientists.  You can use the same methods to dry flowers from your own garden.

There are several ways to press flowers.  The key requirements are: 1) the flowers are dried (often slowly) to a very dry state; 2) they are pressed flat (by applying pressure).  We prefer old-time methods, but you can explore other techniques in the ‘Resources’ at the end of this posting.

You may have pressed flowers between the pages of a book – or under a stack of heavy books.   This method works fine, but there’s a risk of ruining the books in the process.  So unless the book(s) are no longer needed, you might want to consider using a plant press instead.  Plant presses can be purchased at science/teacher supply stores and craft stores.  But they are easy and inexpensive to make. 


Making a Plant Press

Every plant press has two sturdy, flat ‘press-boards’ that are used to apply pressure.  You can cut the boards from plywood or purchase two inexpensive, sturdy wood or plastic cutting boards (see below – we chose plastic).  The surface should be smooth on at least one side – not textured or warped.    If you want to press only flowers, a handy size is about 6 inches (15 cm) by 12 inches (30 cm). 

 

 
Next you’ll need a method to apply pressure to the plant press.  Many purchased flower presses have a bolt with a wing nut through each corner; these can be tightened to apply pressure.   You can do equally well using four stout cords, straps – even bungee cords – wrapped around the plant press (see below).  Alternatively, you can just place several heavy books or bricks (cinderblocks are great!) atop the press to apply pressure.  All you need is some way to cinch down the press tightly – or weigh down the press-boards.

The plant press is filled with sheets of paper, cardboard and newspaper (or blotter paper) which absorb water from the pressed flowers (see photo, above).  Once again, readily available materials will do.   Sheets from an inexpensive 9 x 12 inch sketch pad can be folded in half to make a set of  9 x 6 inch folios to hold the plant materials.   Sections of newspaper, folded and cut to size, make dandy blotting papers to layer above and below the folios.   And pieces of cardboard – either chipboard or corrugated – can be cut to size to provide added stiffness.

 

Pressing Flowers and Foliage

Use only plant material that is dry – wait for the dew to dry before collecting.  Begin with relatively small and thin flowers until you gain some experience.  You can collect only flowers or flowers with some foliage – a 6-8 inch stem works well.  You may want to include some additional foliage to use in your dried floral crafts. We find it best to wait about 5 minutes after cutting before putting the plant material in the plant press.  The flowers/leaves will wilt just slightly, making them easier to position. 
 
 


Open the plant press and place a layer of cardboard and then a layer of newspaper/blotter on top of the bottom press-board.  Next place a folio sheet on the newspaper.    Open up the folio and arrange flowers and foliage so they look attractive and natural.  Be sure that each flower has plenty of space (see above).  Carefully close the folio, add a layer of newspaper, then another folio, and so on.  If the flowers are very thin, you’ll only need one newspaper/blotter layer for every 2-3 folios.  Place a layer of cardboard every inch to add stiffness.
 


 
Once all the flowers are in the press, add a final layer of newspaper topped with cardboard and then the top press-board.   Cinch up the cords/straps or place bricks/heavy books atop the press.  Place the press in a dry shady spot (indoors or out) to dry.    Check the press in a day or two and tighten the cords/straps if needed.   Remember, the plants materials will shrink as they dry – and it’s important to keep them flat throughout the drying process.

After 4 days, open the press and check the plant materials.  If plants are thin and the weather is hot/dry your plants may already be dry.  If plants are still moist, replace the newspaper blotters with dry ones, and close the press to continue drying.  You can air-dry the wet blotters and re-use them many times.

Once the flowers are completely dry, remove them from the plant press.  They will be brittle, so store them in a safe, dry place until you use them. 

  

Resources




 

 

Please feel free to add your comments, below.  If you have questions, please e- mail us at: mothernaturesbackyard10@gmail.com