Mother Nature's Backyard - A Water-wise Garden: Designing Your New California Garden: 9. Managing Water

Last month (February 2014) we considered several topics critical to managing your garden water: setting water goals, Water Zone gardening and capturing/using rainwater. If you didn’t catch the February post, we suggest that you read it before you continue: http://mother-natures-backyard.blogspot.com/2014/02/designing-your-new-california-garden-9.html. If you’re new to the ‘Designing Your New California Garden’ series, you might want to start at the beginning (July, 2013; http://mother-natures-backyard.blogspot.com/2013/07/designing-your-new-california-garden-1.html ). The monthly posts and exercises introduce you to the ‘New California Garden’ concept and to our example garden at 112 Willow Street.

Introduction and Background

By this point you’ve probably guessed that the ‘irrigation system’ in the New California Garden is not likely to be a conventional, one size fits all ‘sprinkler system’. Instead it will be tailored to the Water Zone Plan, site characteristics and the needs of the gardeners themselves. Part of the trick to designing a functional and enjoyable garden is to look honestly at your own needs and constraints.

Proper watering of native (and other) plants is at least as important as selecting the right plant for a given water zone. More native plants die in home gardens due to improper watering than almost any other cause. An irrigation system that allows you to water plants easily and properly is key to a successful garden. And because your garden will mature – and climate will change – your irrigation system must also be flexible.

Your ‘irrigation system’ can be anything from a simple spigot and hose to a complex automated irrigation system (or some combination of both). There’s no one system that’s right for all gardens. If your landscape plan includes more than one Water Zone – or if your site is anything other than a small flat piece of ground – you may need to use several types of irrigation methods to water everything properly. Fortunately, you have several options to choose from – and plenty of resources to turn to for advice.

We summarize the benefits, limitations and best uses for the most common types of irrigation methods used in Southern California at: http://www.slideshare.net/cvadheim/irrigation-methods-for-southern-california-gardens This table reflects our experience with watering native plants in western Los Angeles County; other experts may present other points of view. Realize that the relative advantages and disadvantages vary with climate, soil and other factors. Much of the readily available information on watering native plants – both on-line and in books - is directed to gardeners in central & northern California, or in desert areas. While generally useful, remember that such information is not specific to our unique climate(s) in western Los Angeles and Orange Counties.

Planning an Irrigation System: Example from 112 Willow St.

It’s easier to plan your own irrigation system once you’ve seen a worked example. So let’s design a new irrigation system for 112 Willow Street.

The current irrigation system for 112 Willow Street is shown on the site map (above). The ‘system’ may be similar to your own. It consists of two separate water lines: one line that supplies conventional sprinklers (front and back) and a second supplying 4 hose bibs (spigots). The sprinklers are controlled by two timers: one for the front yard and one for the back. The backyard timer has two stations: the northern part of the backyard (nearest the house; station 1) and the rest (station 2).

As discussed before (February, 2014), the front yard will be left as is for now; the automated sprinkler system will continue to water this area every 10 days for the near future. However, in considering the irrigation needs of the entire yard, we realize that an additional spigot at the east side of the front yard would greatly facilitate watering the ‘meditation garden’. We add this to the Irrigation System Map, even though the installation may take place several years in the future.

The backyard sprinkler system won’t need a lot of modification to make it suitable for irrigating the new lawn (see above). One sprinkler head is superfluous and another would be better if moved slightly. That and some new, water efficient sprinkler heads with the correct spray radius (8-10 ft.) and we’re in business. The sprinkler system will likely provide all the water needed for the ‘shady seating’ area as well. If not, we can supplement occasionally with a hose and sprinkler. If you need more information on irrigation systems and their design we highly recommend the following tutorials: http://www.irrigationtutorials.com/ .

Planning an irrigation system for the vegetable garden requires deciding how the space will actually be used. The gardeners like raised beds, and there’s room for at least two different configurations, each providing 120-130 square feet of growing space (see below). The gardeners will consider how to arrange the raised beds and will design them next month (April 2014). Whatever the configuration, they’ll want an irrigation system that’s flexible and as water-wise as possible.

The gardeners decide to use inexpensive ooze-type soaker hoses, covered with mulch, to water the raised vegetable beds. This will allow them to water only the planted areas, leaving the pathways dry. Installing a hose bib for each bed will give the most flexibility. The soaker hoses can be attached directly to the hose bib in each bed. And each bed can be controlled separately, providing the right amount of water for each crop through the growing season.

During most of the year, the gardeners will control the water manually, as needed. This is, in fact, the most water-efficient method of irrigation. But what about during the three week summer vacation when the gardeners are routinely away?

Depending on how we design the irrigation system, we can have all the beds on a single, multi-station timer or use individual, battery operated timers for each bed. In our experience, many smaller yards, particularly if landscaped with water-wise plants, don’t require sophisticated (and costly) irrigation systems with sensors. Inexpensive hose timers are readily available, easy to use and work well in many situations. You can even store them away when they aren’t needed to extend their life. For more advice on timers and sensors see:

http://www.sandiego.gov/water/pdf/waterwisegardening.pdf

http://www.irrigationtutorials.com/#sprinkler

http://www.water.ca.gov/wateruseefficiency/docs/irrigation_controllers_0903.pdf

The ‘butterfly garden’ area, which is on a 6-9% slope, has presented an irrigation challenge in the past. The gardeners plan to install primarily water-wise plants – and place the most drought-tolerant of these on the drier top of the slope. This will go a long way towards making the area less problematic. But even though the plants will be Water Zone 2 at maturity, the ‘butterfly garden’ will require summer water during the establishment phase (likely the first year or two after planting) and occasionally thereafter. The gardeners will need an irrigation method that is flexible; and once again, they have several options.

One possibility is to use drip irrigation for the first few years. While some native plant nurseries recommend against drip irrigation, in fact this method can be useful in some circumstances in our part of California. Drip irrigation has come a long way in the past decade. For a good, thorough tutorial on drip irrigation see http://www.dripirrigation.com/drip_tutorial.php . There are many more choices of emitters including micro-sprinklers and soaker-emitters. These can be used successfully with California native plants under certain conditions. In our experience, drip irrigation is best used to get plants started or for container plants.

There are several downsides to drip irrigation. Drip systems can be costly, particularly if you pay to have them installed. The emitters can plug – or even pop off – during irrigation, so gardeners should inspect their emitters regularly for proper functioning. Don’t assume your plants are being watered adequately unless you check your drip system routinely!!

As the root systems grow, the emitters need to be relocated to provide optimal water to the plants. Remember that the root systems of many native plants expand quickly; failure to move emitters around growing plants is another common mistake made by home gardeners.

In our experience, simple soaker hoses can also be used on small garden slopes, provided that drainage is adequate and watering is done over several days. The secret is to water the area, using a slow seep rate, until runoff starts. After a few times you’ll know just how long this takes. Then water again in the next day or two. This will provide a good soaking, and can be repeated every other week, or as needed, during the first summer. The advantages of soaker hoses over drip are several: 1) lower cost; 2) lower maintenance requirements; 3) more even water coverage (good as plant roots grow out); 4) if covered with mulch they last for years, providing for supplemental water when needed.

Because the top of the slope dries out before the bottom, the gardeners will use several soaker hoses to give them maximal flexibility. The soaker hoses will be installed once the ‘butterfly garden’ is planted to insure good coverage. After securing the hoses with landscaping staples (also called ‘landscape fabric pins’ or ‘sod staples’), they will be covered with mulch. They will be connected to the nearby hose bib (spigot) with a hose when in use. When not in use they will be completely invisible.

The gardeners could also choose to water the ‘butterfly garden’ with a sprinkler that attaches to a hose. There are many options available – including ones that are quite attractive. This option has the advantage of being very flexible; you can just water the dry areas and not worry about areas that don’t need water. It also provides a good approximation of rain if you need to water during winter/spring dry spells.

But any type of overhead watering, whether with conventional sprinklers or those attached to a hose, has several disadvantages. First, overhead irrigation is less water efficient: in dry climates like ours, some water will evaporate before reaching the ground and more will evaporate from the mulch without reaching the ground beneath. The other disadvantage, particularly for summer watering, is that overhead watering increases the chance of fungal diseases. Wet leaves and warm conditions favor the growth of fungi; and leaf splash can spread fungal spores from one plant to the next.

As currently envisioned, the ‘meditation area’ will not need much irrigation once established and the gardeners plan to use stored rainwater to supply some of the water in the future. The irrigation system for this area will depend on the landscape design for this area. The back of the neighbor’s garage abuts this area – an ‘ugly view’. The arrangement of the seating – and choice of plants – will dictate the irrigation needs for this area. If the homeowners choose a trellis and vine to mask the ‘ugly view’ they will need to supply irrigation to the vines. Native honeysuckle vines would do well and require only occasional water once established. We’ll have to wait to finish the irrigation system for the 'meditation area’.

On further review of the ‘near final’ irrigation plan for 112 Willow, the gardeners decide that having a spigot to water the meditation garden will be a necessity as soon as that area is installed. The idea of watering the area from a backyard spigot doesn’t seem workable.

Designing Your Irrigation Plan

We suggest the following steps in designing your irrigation system:

Using a copy of Site Map 2, map your existing irrigation system

Compare your current system with your Water Zone map.

Decide what parts of your current irrigation system are compatible with the Water Zones in your new garden. You may be surprised; conventional sprinkler systems can sometimes be modified to work. If parts of the system are no longer needed they can be capped off. And new sprinkler heads can decrease water loss to evaporation.

Consider how you’ll supply water to Water Zones 1 and 2. Remember that new plants will need to be watered for at least one or two summers until they are established – and Zone 1-2 and 2 plants will need occasional summer water thereafter.

Once you’ve decided on possible irrigation choices we suggest that you step back and evaluate. In fact, you may want to put your plans aside for a day or two. Then ask yourself the following questions:

· Are these choices consistent with the amount of time/effort you want to spend watering the landscape?

· Are they feasible in terms of cost, skills needed to construct, maintenance requirements?

· Look at your Base Map 2; are you sure you haven’t located irrigation lines where they will interfere with anything critical (like gas & electric lines).

· Is the ‘system’ flexible (for example, can you change if the initial method doesn’t work well; can you use overlapping systems if you need to water one part of a Zone a bit more)?

· Have you planned enough: spigots? Sprinkler heads? controllers? Are these in convenient locations? If not, now it the time to do something about it.

Once you’re happy with your plan then construct a final Irrigation Plan map. Be sure to note location of spigots, location of irrigation pipes and sprinkler risers (if any) and the types of heads, and location of drip irrigation lines and soaker hoses (if any).

Additional Internet Resources

http://www.ext.colostate.edu/pubs/Garden/07239.html

http://www.sandiego.gov/water/pdf/waterwisegardening.pdf

http://www.bewaterwise.com/